Camec Caravan Mover, Elite Pro 2

SKU: 07-100-005
NZ$2,699.00
NZ$2,699.00
Unavailable
per item

PLEASE ENQUIRE ABOUT AVAILABILITY BEFORE ORDERING

Don't live through another season pushing your caravan around. The Camec Elite Pro 2 is an economical and effective solution for manoeuvering your caravan at the push of a button. This caravan manoeuvering system consists of two 12 Volt motor power rollers, a 12 Volt electronic control unit and a remote control handset. The simple to use remote control directs the caravan into any position, even allowing rotation of the caravan through 360°. The Elite Pro 2 model offers an auto-engage feature as standard at the push of a button. It features soft start and soft stop technology eliminating jerky movements, also extra control when going downhill makes parking, hitching and manoeuvering your caravan to the perfect position easier. The mover is suitable for L and U profiled chassis with a thickness between min 2.8mm and max 3.5mm. It also comes with an L shaped chassis adaptor plate which will bolt onto NZ/AUS chassis to allow easy installation. The ground clearance from the bottom of the chassis must be a minimum of 165mm.


Please Note: The previous Elite Pro model and the new Elite 2 movers are not compatible with each other and cannot be paired together.
Installation Services are also available, email us via the link below for enquiries:
Features:
  • Economical and effective solution for manoeuvring your caravan
  • Excellent quality aluminium rollers that are friendly to tyres
  • Automatically engage or disengage the rollers by remote control
  • Accurate & durable gearing
  • Optimal compact design
  • Reasonable ground clearance
  • Suitable for almost any light duty single axle chassis as well as most caravans with a side apron, suitable for twin axle caravans up to 2000Kg
  • E-coating & powder coating corrosion protection
  • All important components are fully protected against water spray, dirt and oil
  • Manoeuver your caravan effortlessly with soft start and stop technology
  • 2 way communication remote control technology provides excellent anti-interference protection against other electronic signals
  • The caravan will stop automatically if it is out of range of the remote control
  • Features an isolation switch to prevent accidental activation of the remote control
  • Please note: The previous Elite model and the new Elite 2 are not compatible with each other and cannot be paired together
Caravan Mover Elite Pro 2 Manual
File Size: 1563 kb
File Type: pdf
Download File
Specifications:
  • Not suitable for rear shackle type suspensions
  • Suitable only for L and U profiled chassis with a thickness between 2.8 - 3.5mm
  • Operational Voltage:  12 Volt DC
  • Speed: Approx. 11cm per sec
  • Average current consumption: 30 Amps
  • Maximum current consumption: 120 Amps
  • Minimum Width (Caravan/Trailer): 1800mm
  • Maximum Width (Caravan/Trailer): 2500mm
  • Maximum tyre width: 205mm
  • Safe working load (2 movers): 2000 Kg reducing to 1750 Kg on a 18% gradient
  • Safe working load (4 movers for tandem axle): 3000 Kg reducing to 2350 Kg on a 18% gradient
  • Dimensions Part A (mm): L740 x W320 x D440
  • Dimensions Part B (mm): L1490 x W260 x D90
  • Weight (2 motor set): approx 33 Kg (excludes battery)
  • Warranty: 2 Years

Related Products:

Camec Caravan Mover, Elite 2

NZ$2,253.00
View Product Details

Trailer Valet Caravan Mover XL

NZ$1,782.10
View Product Details

Manual Trailer Valet Mover

NZ$892.50
View Product Details