Camec Caravan Mover, Elite 2

SKU: 07-100-001

NZ$2,150.00

Unavailable

Dont live through another season manually pushing your caravan around. The Camec Elite 2 is an economical and effective solution for manoeuvering your caravan at the push of a button. This caravan manoeuvering system consists of two 12 Volt motor power rollers, a 12 Volt electronic control unit and a remote control handset. The simple to use remote control directs the caravan into any position, even allowing rotation of the caravan through 360°. Both movers have aluminium rollers that engage with the tyres to make the wheels turn. The supplied cross actuation device enables you to engage both rollers at the same time from one side of your caravan. Featuring soft start and soft stop technology eliminating jerky movements, also extra control when going downhill makes parking, hitching and manoeuvering your caravan to the perfect position easier. The mover is suitable for L and U profiled chassis with a thickness between min 2.8mm and max 3.5mm. It also comes with an L shaped chassis adaptor plate which will bolt onto NZ/AUS chassis to allow easy installation. The ground clearance from the bottom of the chassis must be a minimum of 165mm.

Please Note: The previous Elite model and the new Elite 2 model movers are not compatible with each other and cannot be paired together.

Quantity

Add to Cart

Installation Services are also available, email us via the link below for enquiries:

Email Us - Click Here

Features:

Economical and effective solution for manoeuvring your caravan
Excellent quality aluminium rollers that are friendly to tyres
Easy winding action to engage or disengage the rollers
With cross actuation kit you can engage and disengage both rollers from either side
Optimal compact design
Reasonable ground clearance
Suitable for almost any light duty single axle chassis
E-coating & powder coating corrosion protection
All important components are fully protected against water spary, dirt and oil
Manoeuver your caravan effortlessly with soft stop and start technology
2 way communication remote control technology provides excellent anti-interference protection against other electronic signals
The caravan will stop automatically if it is out of range of the remote control
Features an isolation switch to prevent accidental activation of the remote control
Please note: The previous Elite model and the new Elite 2 model are not compatible with each other and cannot be paired together

Specifications:

Not suitable for rear shackle type suspensions
Suitable only for L and U profiled chassis with a thickness between 2.8 - 3.5mm
Operational Voltage: 12 Volt DC
Speed: Approx. 9cm per sec
Average current consumption: 20 Amps
Maximum current consumption: 100 Amps
Minimum Width (Caravan/Trailer): 1800mm
Maximum Width (Caravan/Trailer): 2500mm
Maximum tyre width: 205mm
Safe working load (2 movers): 1800 Kg reducing to 1500 Kg on a 18% gradient
Safe working load (4 movers for tandem axle): 2500 Kg reducing to 1800 Kg on a 18% gradient
Dimensions Part A (mm): L765 x W533 x D270
Dimensions Part B (mm): L1490 x W260 x D90
Weight (2 motor set): approx 37 Kg (excludes battery)
Warranty: 2 Years